Hikvision DS-7316HQHI-SH User Manual - Page 129
Enabling HDD Overwrite, Enabling HDD Sleeping
View all Hikvision DS-7316HQHI-SH manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 129 highlights
Figure 156 Disk Format Progress Bar Enabling HDD Overwrite Enabling HDD overwrite will allow the DVR to overwrite the installed disks once the disks are full. To enable HDD overwrite: 1. Enter the HDD menu by going to Menu > System Configuration > HDD. 2. Select the Record Information tab, as shown in Figure 157. Figure 157 Record Information Menu 3. Check the Overwrite checkbox. 4. Click the Apply button. 5. Click to exit. Enabling HDD Sleeping Enabling HDD Sleeping will allow the DVR to set HDD to sleep status when HDD is idle. To enable HDD sleeping: 1. Enter the HDD menu by going to Menu > System Configuration > HDD. 2. Select the Record Information tab, as shown in Figure 158. Figure 158 Record Information Menu 3. Check the Sleeping checkbox. 4. Click the Apply button. 5. Click to exit. 128