Hikvision DS-7316HQHI-SH User Manual - Page 57
For IP camera, only Customize is supported. You can adjust the Brightness, Contrast
View all Hikvision DS-7316HQHI-SH manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Figure 55 Analog Camera Image Settings Menu 3. For analog camera, there are four preset modes for selection: Standard, Indoor, Dim Light and Outdoor. You can select one according to the real situation. 4. You can also adjust the image parameters like Brightness , Contrast , Saturation , Hue by dragging the corresponding icon. The effect will be displayed immediately on the screen. Click Default will restore the default settings. If the same settings can be applied in other channels, click the Copy button to pop- up a Copy to box and check the corresponding checkbox. Click the OK button to save and back to Image Setting menu. Click Cancel to exit without saving. Click OK to save the settings and return to the Live Feed mode. 5. For IP camera, only Customize is supported. You can adjust the Brightness, Contrast, Saturation and Hue by dragging the corresponding icon. Click the OK button to save the settings and back to the Live Feed mode. You can also enter the Image setting menu by going to Menu > Cameras Setup > Image, as shown in Figure 56. The steps are similar to the live feed icon setting steps. If the same settings can be applied in other channels, click the Copy button to copy it to other channels. Figure 56 Image Settings Menu 56