Hikvision DS-7316HQHI-SH User Manual - Page 114
Configuring Video Quality Diagnosis
View all Hikvision DS-7316HQHI-SH manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
Figure 129 Video Loss Detection Menu 2. Select the camera to setup video loss detection in using the camera dropdown list. 3. Click Enable Video Loss Detection. 4. Press the Handing Set button to set up handing method. 1) Select the Arming Schedule tab to set the arming schedule. Up to 8 periods can be configured. If the same schedule can be applied in other channel, click Copy. 2) Select the Handing tab to set the actions to take if tamper-proof is detected. 5. Click the Apply button to save the settings. Click OK to back to the previous menu. 6. If the same settings can be applied in other channels, click Copy to copy the same configuration to other channels. 7. Click Apply to save the settings. Configuring Video Quality Diagnosis Video Quality Diagnosis can be enabled on any of the analog channels on your DVR to detect the video quality, and alarm user if video quality get worse to a threshold. To configure video quality diagnosis: 1. Enter the Video Quality Diagnosis menu, shown in Figure 130 by going to Menu > Cameras Setup > Video Quality Diagnosis. 113