Hitachi VT-F462A Owners Guide - Page 32
Ch 08, Add Or Erase Channel, Select Channel, To Erase: Press, To Add, Press, To End Press
View all Hitachi VT-F462A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
CHANNEL TUNING 3. Select the channel number by pressing buttons "0" through "9". (Press "0" and then "8" for channel 8.) Press the PLAY button to add channels and the STOP button to erase channels. Perform the same procedure to add or erase other channel numbers. CH 08 ADD OR ERASE CHANNEL SELECT CHANNEL TO ERASE: PRESS STOP TO ADD : PRESS PLAY *TO END PRESS GUIDE NOTE: Erased channels cannot be selected by the CHANNEL button, but can be selected by buttons "0" through "9". 4. Press GUIDE button to return to the TV screen. NOTE: There are some areas where channels cannot be switched when "CATV1" is selected. In this case, select "CATV2" as in step 6 on the previous page. Your VCR is capable of receiving "off-the-air" TV channels (VHF 02 - 13, UHF 14 - 69) and CATV channels 01 - 125, a total of 181 channels*. * You can receive channels 02 - 13 on both "off-the-air" and "cable" channels. Therefore, the total number of channels including "off-the-air" and "cable" channels is 181 channels (12 + 56 + 125 - 12 = 181). 32