Hitachi VT-F462A Owners Guide - Page 40
Recording Second Audio Program SAP
View all Hitachi VT-F462A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
RECORDING TV PROGRAMS RECORDING TV PROGRAMS (cont.) pg. 26 To record one program while viewing another You can record one program while viewing another by setting the VCR for recording, then setting the VCR/TV select button to "TV", and selecting the desired channel on your TV. To change the channel to be recorded while in record mode During recording, the channel lock function operates and channel cannot be changed if the CHANNEL select button is pressed. If you wish to change channel, proceed as follows. 1. Press the PAUSE button. 2. Change channel desired. 3. Press the PAUSE button to release record pause mode. Recording broadcast stereo TV The basic procedure for recording broadcast stereo TV is the same as it is for normal off-the-air recording. Before you start recording, be sure that "STEREO" is selected following "STEREO/MONO SELECTION" on page 23. The STEREO indicator will come on if the station is broadcasting in stereo. Press the REC button to start recording. INITIAL SETUP 1 ANTENNA/CABLE 2 AUTO CHANNEL SETTING 3 ADD OR ERASE CHANNEL 4 VCR CODING 5 MOVIE RETURN 6 AUDIO PLAYBACK 7 STEREO/MONO 8 SECOND AUDIO *TO END PRESS GUIDE Recording Second Audio Program (SAP) Some stations transmit the Second Audio Program. To record the Second Audio Program, be sure that "ON" is selected following "SECOND AUDIO ON/OFF SELECTION" on page 23. When the station broadcasts an SAP, the SAP indicator will turn on. Press the REC button to start recording. Your VCR will record the SAP audio on both the Hi-Fi and linear sound tracks. Note: Because SAP is transmitted together with a stereo signal, the STEREO function must also be set to the STEREO mode before your VCR can record the SAP. 40