Hitachi VT-F462A Owners Guide - Page 74
PROGRAM EASY EDIT, Connection, Cautions
![]() |
View all Hitachi VT-F462A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
PROGRAM EASY EDIT Note: Make sure the recording VCR is in the line mode. 4. Press the PAUSE button on the playback VCR to start copying the tape. Both VCR's will start together. 5. Press the PAUSE button again when you want to stop copying the tape. Both VCR's will enter the pause mode. Note: If the next segment you want to copy is located farther away on the tape, use the F.FWD (fast forward), REWIND, or PLAY button on the playback VCR to locate the place on the tape you want to begin copying again. Then place the playback VCR in the play-pause mode. Press the PAUSE button again and both VCR's will begin copying. 6. Press the STOP buttons on both VCR's when you are finished. PROGRAM EASY EDIT If the part to be edited has been programmed, the playback VCR automatically controls the record VCR for editing. Connection Hookup illustration Cautions: • When connecting cables, turn the power off on all units. • When only one TV set is used, connect it to the record VCR. • Set the remote control code of the playback VCR (this VCR) to [VCR1] for program easy editing (refer to page 22). If the record timing drifts with the [VCR1] setting, set it to [VCR2]. 74
![](/manual_guide/products/hitachi-vtf462a-owners-guide-caa678c/74.png)