IBM 17231RX Installation Guide - Page 22
miscellaneous
![]() |
UPC - 000435862730
View all IBM 17231RX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
4. Adjust the outer slide-rail brackets to fit the depth of the rack cabinet, and then attach the front of the slide-rail brackets to the rack cabinet, using four screws from the miscellaneous hardware kit. Make sure that the slide-rail brackets extend outside of the rack-cabinet mounting flanges. Note: Do not install screws in the middle holes in the slide-rail bracket. These holes are for the thumbscrews on the front of the console unit. 5. Loosely attach the back of the slide-rail brackets to the rack cabinet, using four screws from the miscellaneous hardware kit. Make sure that the slide-rail brackets extend outside of the rack-cabinet mounting flanges. 6. Tighten the two rail-adjustment screws on each of the outer rails if you loosened them in step 3 on page 11. 12 1U 17-inch Flat Panel Console Kit: Installation and Maintenance Guide
![](/manual_guide/products/ibm-17231rx-installation-guide-c9f8044/22.png)