IBM 17231RX Installation Guide - Page 45

Replacing, slide-rail, assemblies

Get IBM 17231RX - 1U Flat-Panel Monitor Console PDF manuals and user guides
UPC - 000435862730
View all IBM 17231RX manuals
Add to My Manuals
Save this manual to your list of manuals

Page 45 highlights

8. Attach the cable-management arm to the outer slide-rail bracket, using the screw that you removed in step 3 on page 33. 9. If you removed a console switch from behind the console unit, reinstall it now. 10. Reconnect the keyboard, mouse, and video connectors to the server or console switch. 11. Connect power to the display. Replacing the slide-rail assemblies Note: To make sure that the slide-rail assemblies fit correctly, replace both the outer and inner slide rails at the same time. To replace the outer and inner slide-rails for the console unit, complete the following steps: 1. Turn off the display and disconnect the power from the display. 2. Disconnect the keyboard, video, and mouse connectors from the server or console switch. 3. If a console switch is installed in the rear of the rack cabinet, remove the console switch from the rack. Chapter 4. Hardware maintenance information 35

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
8.
Attach
the
cable-management
arm
to
the
outer
slide-rail
bracket,
using
the
screw
that
you
removed
in
step
3
on
page
33.
9.
If
you
removed
a
console
switch
from
behind
the
console
unit,
reinstall
it
now.
10.
Reconnect
the
keyboard,
mouse,
and
video
connectors
to
the
server
or
console
switch.
11.
Connect
power
to
the
display.
Replacing
the
slide-rail
assemblies
Note:
To
make
sure
that
the
slide-rail
assemblies
fit
correctly,
replace
both
the
outer
and
inner
slide
rails
at
the
same
time.
To
replace
the
outer
and
inner
slide-rails
for
the
console
unit,
complete
the
following
steps:
1.
Turn
off
the
display
and
disconnect
the
power
from
the
display.
2.
Disconnect
the
keyboard,
video,
and
mouse
connectors
from
the
server
or
console
switch.
3.
If
a
console
switch
is
installed
in
the
rear
of
the
rack
cabinet,
remove
the
console
switch
from
the
rack.
Chapter
4.
Hardware
maintenance
information
35