IBM 17231RX Installation Guide - Page 42
approximately
UPC - 000435862730
View all IBM 17231RX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
13. Fasten the keyboard-and-mouse cable to the console unit with the nut and clamp: a. Push the keyboard-and-mouse cable into the clamp that you removed in step 4 on page 27. Important: Make sure that you place the clamp on the keyboard-and-mouse cable approximately 70 - 76 mm (2.75 3 in.) from where the cable exits the keyboard. This prevents the cable from hanging below the bottom of the console unit. Note: The following illustration shows the underside of a fully extended console unit that is installed in a rack. b. Place the clamp on the screw on the console unit frame and hand-tighten the nut on top of the clamp. 14. Route the keyboard-and-mouse cable and the other cables through the cable-management arm. To avoid placing strain on the cables, secure the cables by using the hook-and-loop fastener cable straps. Make sure that the cable-management arm is in the extended position when you secure the cables to it. 15. Reconnect the keyboard-and-mouse cable to the server or console switch. 16. Carefully lift the flat-panel display to the full upright position. 32 1U 17-inch Flat Panel Console Kit: Installation and Maintenance Guide