IBM 17231RX Installation Guide - Page 54
following
UPC - 000435862730
View all IBM 17231RX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
10. Turn over the replacement console unit: a. Grasp the cable-management arm and the loose cables in one hand. b. On the opposite end of the console unit, grasp the flat-panel display and the console unit frame together with the other hand. c. Carefully turn over the console unit. Attention: When you route the keyboard-and-mouse cable, make sure that the cable does not hang below the underside of the keyboard where it might be damaged if it interferes with the devices in the rack space below the console unit. 11. Route the keyboard-and-mouse cable: a. Route the cable through the slot on the left side of the cable-routing area on the underside of the keyboard. Do not route the cable through any of the other three slots. (See the following illustration.) Note: In the following illustration, the console unit is turned over and is placed on a table or other flat surface. b. Push the keyboard-and-mouse cable through the slit in the plastic bushing that you removed in step 2 on page 42 and push the bushing into the cable-routing cutout in the console unit frame. 44 1U 17-inch Flat Panel Console Kit: Installation and Maintenance Guide