IBM 6400-I15 User Manual - Page 120

set Commands These settings alter the current or working settings in memory only. Therefore, they will be lost if the Ethernet Interface is power cycled. To ensure this does not happen, be sure to issue a "save" command so the current settings get written to flash memory. set date year month day set date 1997 02 10 Set the current date noting the four-digit year, the two-digit month from 1 through 12, and the day being the number in the month. If the Ethernet Interface is reset, this value will be lost so you will need to set the date again. set dest destination name newname set dest d1prn name laser Change the current name of the destination to a new name as indicated by newname. This newname must be nine characters or less or it will be truncated. These names are case sensitive. set dest destination backchannel prn [prn] set dest d1prn backchannel prn Establish a return path for printer feedback for a given destination. Since the Ethernet Interface I/O port is bi-directional, however, you will most likely use the same I/O port that the destination is currently sending jobs to. set dest destination model modelname set dest d1prn model m4 Associate a model with a destination. Jobs sent to the named destination are processed according to the options defined in the named model. 7-8 Commands