IBM 6400-I15 User Manual - Page 24
Power-on Self Test, Run and Auto Reset Modes, Table 1-2. Run Mode and Auto Reset Mode Indicator
View all IBM 6400-I15 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
The Ethernet Interface also has a self test and internally controlled modes. These are: Power-on Self Test The seven stage power-on self test performs diagnostics on the Ethernet Interface processor, RAM, ROM, EEPROM, parallel port, and network interface. The STAT, ERR, and NET LEDs indicate which test is currently in progress. Run and Auto Reset Modes Run Mode is the normal operating state of the Ethernet Interface. Auto Reset mode is entered when the watchdog timer is triggered and the Print Server resets itself. In either mode, the STAT LED flashes differently depending on whether the unit IP address is configured. The Run Mode and Auto Reset Mode indicator descriptions are given in Table 1-2. Refer to the Glossary for definitions. Table 1-2. Run Mode and Auto Reset Mode Indicator Descriptions STAT Flashes On Flashes On Flashes Off Flashes Off Rate once per second 2.5 times per second 2.5 times per second once per 2 seconds Indicates Normal Mode, IP address configured Monitor Mode, IP address not configured Monitor Mode or Download Mode, IP address not configured Download Mode, IP address configured 1-4 Introduction