IBM 6400-I15 User Manual - Page 46
Configuring AS/400 for TCP/IP
View all IBM 6400-I15 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
SSAP When *CALC is used, the values of "12" and "AA" are entered automatically as defaults. Verify that those SSAP values have not been changed. Configuring AS/400 for TCP/IP The next step in configuring the AS/400 for the IBM 6400 printer is to configure the interface on the AS/400 for TCP/IP. NOTE: The AS/400 interface is not the IBM NIC. Do not set the S/400 interface address to the same address as the NIC IP address. Also do not add the NIC to the AS/400 TCP/IP interface list. Configuring an AS/400 TCP/IP Interface with ADDTCPIFC ADDTCPIFC is used to add a TCP/IP interface to AS/400. This step configures the AS/400 for attachments to a TCP/IP network. At the AS/400 command line, enter the following command: ADDTCPIFC INTNETADR ('9.99.15.188') LIND(ETHLAN) SUBNETMASK('255.255.255.0') Your completed screen should look like Figure 3-2. Figure 3-2. Example ADDTCOIFC Interface System: BLDD6 Internet address Subnet mask Line description Line type Interface status Type of service Maximum transmission unit Automatic start 9.99.15.188 255.255.255.0 ETHLAN *Elan Interactive *Normal *Lind *Yes The following parameters must be specified: Internet Address Internet address of the AS/400 Ethernet LAN adapter. 3-4 AS/400 Configuration