IBM 847661U Hardware Maintenance Manual - Page 124
Installing a drive in the removable drive cage, See Removing
![]() |
View all IBM 847661U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 124 highlights
Installing a drive in the removable drive cage: This section gives the procedure for installing drives in the upper drive cage. If you want to remove a drive from the upper drive cage, reverse the order of the following steps. Note Read "Working with drives in bays 1 through 4" on page 107. Read the documentation that comes with the drive. Remove the drive cage. See "Removing the removable drive cage" on page 114. 1. With the front of the drive cage facing you, remove the metal shield for the drive bay you want to use by pulling out the tabs on the sides of the shield until it flexes. Lift off one side, then the other. 2. Touch the static-protective package containing the new drive to any unpainted metal surface; then, remove the drive from it. 116 Netfinity Server HMM
![](/manual_guide/products/ibm-847620u-hardware-maintenance-manual-4ef1215/124.png)