IBM 847661U Hardware Maintenance Manual - Page 171
POST error codes, Time and Date Set?
View all IBM 847661U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 171 highlights
POST error codes POST Error Code/Symptom 101 System board interrupt failure. 102 System board timer error. 106 110 System board memory parity error. 111 I/O channel parity error. 114 Adapter ROM error. 151 Real-time clock failure. 161 Bad CMOS battery. 162 Configuration mismatch. 163 Clock not updating or invalid time set. 164 POST detected a base memory or extended memory size mismatch error. 167 Microprocessor installed that is not supported by the current POST/BIOS. FRU/Action 1. System Board 1. System Board 1. System Board 1. Memory Module 2. System Board 1. Reseat adapters 2. Any Adapter 3. System Board 1. Adapter Memory 2. System Board 1. System Board 1. Run Setup 2. CMOS Backup Battery (See page 217.) 3. System Board 1. Run Setup and verify Configuration 2. Had a device been added, removed, changed location? If not, suspect that device. 3. Power-on external devices first, then power-on computer. 4. CMOS Backup Battery (See page 217.) 5. System Board 1. Time and Date Set? 2. CMOS Backup Battery (See page 217.) 3. System Board 1. Run Setup. Check System Summary menu for memory size change. 2. Run the Extended Memory Diagnostic tests. 1. Update the Flash BIOS to the latest level 2. Processor IBM Netfinity 3000 - Type 8476 163