IBM 847661U Hardware Maintenance Manual - Page 130
To install or remove drives in bays 5 and 6, If there is a drive
View all IBM 847661U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 130 highlights
To install or remove drives in bays 5 and 6: 1. Remove the screw that holds the drive cage, and carefully slide the drive cage past the cover lock and out. 2. If there is a hard disk drive in bay 6, disconnect the cable from the drive in that bay. If there is a drive in bay 5, disconnect its cable. 3. If you are removing a drive, remove the screws that hold the drive in the cage and slide the drive out of the cage. 122 Netfinity Server HMM
To install or remove drives in bays 5 and 6:
1.
Remove the screw that holds the drive cage, and
carefully slide the drive cage past the cover lock and
out.
2.
If there is a hard disk drive in bay 6, disconnect the
cable from the drive in that bay.
If there is a drive in
bay 5, disconnect its cable.
3.
If you are removing a drive, remove the screws that
hold the drive in the cage and slide the drive out of
the cage.
122
Netfinity Server HMM