IBM 847661U Hardware Maintenance Manual - Page 42
Remote administration, System Security, Enter, Secure IDE Devices and Diskette Drives, Disable
View all IBM 847661U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
1. From the Configuration/Setup Utility program menu, select System Security; then, press Enter. 2. The System Security menu appears. 3. Select Secure IDE Devices and Diskette Drives; then, press Enter. 4. Select a device; then, press the Left Arrow (←) or Right Arrow (→) key to toggle the entry to Disable. Note The server supports IDE CD-ROM drives. IDE hard disk drives are not supported. Remote administration : Using this option, the BIOS can be updated remotely from a network server. If an administrator password is set, it does not have to be entered from the server to access this function. Consult the network administrator for information on setting up the network server to perform POST and BIOS updates. To access the Remote Administration setting: 1. From the Configuration/Setup Utility program menu, select System Security; then, press Enter. 2. The System Security menu appears. 3. Select Remote Administration; then, press Enter. 4. To enable update POST/BIOS over the network, select Enabled (default setting). To disable, select Disabled. You might need to perform a POST/BIOS (flash) update under the following circumstances: When you receive a system message instructing you to do so When you install a new microprocessor (see "Microprocessors" on page 130) When you receive an error code (see "Symptom-to-FRU index" on page 160) When you change certain configuration switch settings (see "Microprocessor speed switches settings" on page 153 and "ROM operation mode switch setting" on page 47) Before you can perform a POST/BIOS (flash) update, you must create a Flash Utility Diskette, as follows: 1. Insert a blank, 3.5-inch, formatted 2 MB diskette into diskette drive A. 2. Go to http://www.ibm.com/support/ on the World Wide Web and download the appropriate flash update program. Review the applicable README files, and use this information to copy the Flash Utility program onto the diskette. 3. If applicable, follow any additional instructions on the screen. 34 Netfinity Server HMM