IBM 847661U Hardware Maintenance Manual - Page 184
USB port Device Controller, USB port External Loopback
![]() |
View all IBM 847661U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 184 highlights
Diagnostic Error Code 015-002-XXX USB port Timeout 015-015-XXX USB port External Loopback failure 015-027-XXX USB port Configuration/Setup error 015-032-XXX USB port Device Controller failure 015-034-XXX USB port buffer allocation failure 015-035-XXX USB port Reset condition detected 015-036-XXX USB port Register error 015-040-XXX USB port IRQ failure 015-195-XXX USB port Test aborted by user 015-196-XXX USB port test halt, error threshold exceeded 015-197-XXX USB port test warning 015-198-XXX USB port test aborted FRU/Action 1. Remove USB Device(s) and re-test 2. System board 1. Remove USB Device(s) and re-test 2. System board 1. Flash the system 2. System board 1. System board 1. Reboot the system 2. Flash the system 3. Run memory test 4. System board 1. Remove USB Device(s) and re-test 2. System board 1. System board 1. Run setup and check for conflicts 2. Flash the system 3. System board 1. Information 2. Re-start the test, if need to 1. Press F3 to review the log file. See "Viewing the test log" on page 14. 2. Re-start the test to reset the log file. 1. Make sure component that is called out is enabled and/or connected 2. Re-run test 3. Component that is called out in warning statement 4. Component under test 1. If a component is called out, make sure it is enabled and/or connected 2. Flash the system and re-test 3. Go to "Undetermined problems" on page 198 176 Netfinity Server HMM
![](/manual_guide/products/ibm-847620u-hardware-maintenance-manual-4ef1215/184.png)