IBM 847661U Hardware Maintenance Manual - Page 164
SCSI connectors, Internal SCSI connector
![]() |
View all IBM 847661U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 164 highlights
SCSI connectors: The server comes with a 16-bit UltraSCSI adapter. This adapter has two 68-pin, high-density connectors (one internal and one external). You can use these connectors to install internal SCSI devices in the server and to attach external SCSI devices to the server. Note The 50-pin SCSI connector is not supported. See "SCSI drives" on page 104 for additional information about the SCSI subsystem. Internal SCSI connector: A 4-drop, 68-pin (16-bit) cable is installed in the server. This cable is connected to the internal connector for the 16-bit UltraSCSI adapter. You can use this cable to install additional SCSI devices in the server. A hard disk drive might also be installed in bay 6, depending on the model of the Netfinity 3000 server. For information about termination requirements, see "Termination requirements" on page 105. External SCSI connector: You can attach external SCSI devices to the 16-bit, 68-pin external SCSI connector that is located on the rear of the server. 156 Netfinity Server HMM
![](/manual_guide/products/ibm-847620u-hardware-maintenance-manual-4ef1215/164.png)