IBM 847661U Hardware Maintenance Manual - Page 63
Wake on LAN feature, See the Ethernet
View all IBM 847661U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
The following figure illustrates the wiring in crossover cables. RJ-45 Modular Connector 10BASE-T / 100BASE-TX RJ-45 Modular Connector Twisted Signal Pair Name Pin 1 TD+ 1 Signal Pin Name 1 TD+ 1 TD 2 2 TD 2 RD+ 3 3 RD+ 2 RD 6 6 RD 3, 4 (Not used) 4, 5, 7, 8 Relative to the device connected to the adapter 4, 5, 7, 8 (Not used) Note For additional information about Ethernet protocols, refer to the Ethernet documentation. Wake on LAN feature : The Wake on LAN feature is built into the Ethernet controller. To enable this feature, you must install the appropriate software in the server. See the Ethernet documentation for additional information about Wake on LAN operation. To use the Wake on LAN feature with an Ethernet adapter, you must install Wake on LAN cables. For instructions, refer to the documentation and cables that come with the adapter. IBM Netfinity 3000 - Type 8476 55