IBM 847671U Hardware Maintenance Manual - Page 172
Run Setup. Check to, Care and Asset ID
UPC - 087944520719
View all IBM 847671U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 172 highlights
POST Error Code/Symptom 168 Alert on LAN error 175 176 177 Corrupted Administrator Password. 17X not listed above 183 184 RFID Antenna Installed 186 187 18X not listed above 190 Chassis intrusion detector was cleared. This is information only, no action required. If this code does not clear: 20X Memory data error. 301 303 With an 8603 error. 303 With no 8603 error. FRU/Action 1. Run Setup. Check to see that Ethernet and Alert on LAN are enabled. 2. System Board 3. Riser Card, if installed. 1. Run Configuration 2. System Board 1. Covers were removed from the computer. 1. System Board 1. C2 Security 1. Enter the administrator password 1. Make sure Asset Care and Asset ID are disabled in Configuration/Setup. An RFID Antenna should not be installed. 1. System Board 1. Clear Administration password 2. System Board 1. C2 Security 1. System Board 2. Riser Card, if installed 1. Run Enhanced Diag. Memory Test 2. Memory Module 3. System Board 1. Keyboard 2. Keyboard Cable 3. System Board 1. Mouse 2. Keyboard 3. Keyboard Cable 4. System Board 1. Keyboard 2. Keyboard Cable 3. System Board 164 Netfinity Server HMM