IBM 847671U Hardware Maintenance Manual - Page 30
Continue, To start the Configuration/Setup Utility program, Ctrl+Alt+Del, Press F1 to enter
UPC - 087944520719
View all IBM 847671U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Utility program (see "SCSISelect utility program" on page 49). Review the information that comes with the option before making changes. When you restart the server for the first time after working with most options, a message appears, indicating that a configuration change has occurred. You are then prompted to enter the Configuration/Setup Utility program to manually update the configuration settings or to confirm and save the settings that were automatically updated by the system programs. After you change an option and restart the server, the following screen might appear. POST Startup Error(s) The following error(s) were detected when the system was started: 162 Configuration Change Has Occurred Select one of the following: Continue Exit Setup Note Depending on the configuration changes that occurred, the error message that you see might be different from the one shown here. If the preceding screen appears, select Continue until you reach the Configuration/Setup Utility program menu; then, go to "Configuration/Setup utility program menus" on page 24. If the preceding screen does not appear, use the following procedures to access the Configuration/Setup Utility program menu. To start the Configuration/Setup Utility program: 1. Power-on the server and watch the screen. If the server is already turned on, power-off the server, wait a few seconds until all in-use lights go off, and then power the server back on. (Do not use Ctrl+Alt+Del to restart the server.) 2. When the message Press F1 to enter Configuration/Setup appears, press F1. The Configuration/Setup Utility program menu appears. For information about the menus, see "Configuration/Setup utility program menus" on page 24. 22 Netfinity Server HMM