IBM 847671U Hardware Maintenance Manual - Page 175
Diagnostic error codes, the IBM PC Enhanced Diagnostics test.
UPC - 087944520719
View all IBM 847671U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 175 highlights
Diagnostic error codes Refer to the following Diagnostic Error Codes when using the IBM PC Enhanced Diagnostics test. In the following index, "X" can represent any number. Diagnostic Error Code 000-000-XXX BIOS Test Passed 000-002-XXX BIOS Timeout 000-024-XXX BIOS Addressing test failure 000-025-XXX BIOS Checksum Value error 000-026-XXX FLASH data error 000-027-XXX BIOS Configuration/Setup error 000-034-XXX BIOS Buffer Allocation failure 000-035-XXX BIOS Reset Condition detected 000-036-XXX BIOS Register error 000-038-XXX BIOS Extension failure 000-039-XXX BIOS DMI data error 000-195-XXX BIOS Test aborted by user 000-196-XXX BIOS test halt, error threshold exceeded FRU/Action 1. No action 1. Flash the system 2. System board 1. Flash the system 2. System board 1. Flash the system 2. Boot block 3. System board 1. Flash the system 2. Boot block 3. System board 1. Run Setup 2. Flash the system 3. Boot block 4. System board 1. Reboot the system 2. Flash the system 3. Run memory test 4. System board 1. Flash the system 2. System board 1. Flash the system 2. Boot block 3. System board 1. Flash the system 2. Adapter card 3. System board 1. Flash the system 2. System board 1. Information 2. Re-start the test, if need to 1. Press F3 to review the log file. See "Viewing the test log" on page 14. 2. Re-start the test to reset the log file. IBM Netfinity 3000 - Type 8476 167