IBM 86601RU Hardware Maintenance Manual - Page 183
Power light for that PCI slot., Disabling the PCI slot turns off
![]() |
UPC - 087944414230
View all IBM 86601RU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 183 highlights
1 Tab 2 Adapter retention latch 7 Adapter 8 Adapter retention latch To install a hot-plug PCI adapter: 1. Remove the top cover (see "Top cover removal" on page 262). 2. Determine which expansion slot you will use for the adapter. Note Only PCI slots 1-4 can be used for hot-plug PCI adapters. 3. Disable the selected PCI slot from the operating system. (Refer to the documentation that comes with the operating system for information about disabling a hot-plug PCI slot.) Disabling the PCI slot turns off the Power light for that PCI slot. Attention Make sure the Power light 5 for the hot-plug PCI slot is off before you continue to the next step. 4. Remove the expansion-slot cover 3 : a. Rotate the adapter retention latch 2 counterclockwise. Netfinity 5500 - Type 8660 175
![](/manual_guide/products/ibm-866011u-hardware-maintenance-manual-12f5559/183.png)