IBM 86601RU Hardware Maintenance Manual - Page 281

Error Code/Symptom 089-XXX-001 (Failed Microprocessor test) 089-XXX-002 (Failed Optional Microprocessor test) 165-XXX-000 (Failed System Board test) 175-XXX-001 (Failed Fan 1 test) 175-XXX-002 (Failed Fan 2 test) 175-XXX-003 (Failed Fan 2 test) 175-XXX-004 (Processor Board Temperature sensor out of range) 180-XXX-000 (Diagnostics LED failure) 180-XXX-001 (Failed Information Panel LED test) 180-XXX-002 (Failed Diagnostics LED Panel test) 180-XXX-003 (Failed System Board LED test) 180-XXX-004 (Failed Processor Board LED test) 180-XXX-005 (Failed SCSI Backplane LED test) 201-XXX-001 (Failed Memory test, see"Memory settings" on page 98 ) FRU/Action 1. VRM for Microprocessor 2. Microprocessor 1. VRM for Optional Microprocessor 2. Optional Microprocessor 1. System Board Before replacing the system board, ensure that system board jumper J51 is not installed (the default) when the error occurs. 2. Processor Board 3. Power Backplane 4. Hot-Swap Drive Backplane 1. Fan 1 1. Fan 2 1. Fan 3 1. Check system cooling 1. Run Diagnostic LED test for the failing LED 1. Information LED Panel 2. Power-on Panel 1. Diagnostics LED Panel 2. Power-on Panel 1. Run hot-swap PCI latch test in Other Devices under Extended Tests 2. System Board 1. Processor Board 2. System Board 1. SCSI Backplane 2. SCSI Backplane Cable 3. System Board 1. DIMM Location J1 Netfinity 5500 - Type 8660 273