IBM 86601RU Hardware Maintenance Manual - Page 388
If necessary, change the position of the jumper, Align the white cable with pin 1 and insert
![]() |
UPC - 087944414230
View all IBM 86601RU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 388 highlights
J27 5. Install the jumper extension cable on the Power on control jumper (J32): a. Note the position of the jumper on the pin block and remove the jumper. J32 b. Align the white cable with pin 1 and insert the connector over the pin block. c. If necessary, change the position of the jumper on the jumper extension cable. 380 Netfinity Server HMM
![](/manual_guide/products/ibm-866011u-hardware-maintenance-manual-12f5559/388.png)
J27
5.
Install the jumper extension cable on the Power on
control jumper (J32):
a.
Note the position of the jumper on the pin block
and remove the jumper.
J32
b.
Align the white cable with pin 1 and insert the
connector over the pin block.
c.
If necessary, change the position of the jumper
on the jumper extension cable.
380
Netfinity Server HMM