IBM 86601RU Hardware Maintenance Manual - Page 40
Select Ready Drives, Select 1 or more RDY Ready, drives that will be used to, create the new array
UPC - 087944414230
View all IBM 86601RU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
A screen similar to the following appears. Select Ready Drives Select 1 or more RDY (Ready) drives that will be used to create the new array Cancel OK 2. Select one or more Ready (RDY) drives for the new disk array. To select a RDY drive, click on the desired RDY button from the device area. A disk array identifier appears beside each RDY drive added to the disk array. If you change your mind about a selected drive, select the button again to remove the selected drive from the disk array. 3. Click on OK to define a logical drive for the new array. A screen similar to the following appears. Create Logical Drive Array Free ID Space MB) C 2150 Raid Level 0 Requested Space 2150 OK Cancel 4. Select the RAID level that you want to assign to the logical drive from the pull-down list. The RAID levels available depend on the number of hard disk drives that you select for the disk array. If you have one hard disk drive, the logical drive can be only RAID level 0. If you have two or more hard disk drives, the logical drive can be RAID level 0 or 1. If you have three or more hard disk drives, the logical drive can be RAID level 0, 1, or 5. 5. Type the size, in megabytes, that you want to assign to the logical drive in the Requested Space entry field. 32 Netfinity Server HMM