IBM 86601RU Hardware Maintenance Manual - Page 97

Using the Advanced Configuration functions The Advanced Functions choice allows you to initialize the configuration (reset the ServeRAID controller settings), import the configuration information from the drives, enable and disable the Boot CD-ROM and INT13 extensions, and view the controller and PCI information. When you select Advanced Functions from the Main Menu, a screen similar to the following appears. IBM ServeRAID Adapter Disk Array Mini-Configuration Ver. X.XX Advanced Functions Initialize Configuration Import Configuration from Drive(s) Configure BIOS Settings Adapter and PCI Information Exit Select a choice using the Up and Down Arrow keys, then press Enter. Descriptions of the choices available from the Advanced Functions menu are as follows: Attention The following choices might result in loss of data due to changes in the configuration. Initialize Configuration resets the ServeRAID controller settings to their factory defaults and sets all functional hard disk drives to the RDY state. Import Configuration from Drive(s) reads the most common configuration information from the drives in the server and copies it to the controller's NVRAM and to the controller's EEPROM module. Boot CD-ROM and INT13 Extensions is used to configure the BootCd feature. When BootCd is enabled, the ServeRAID controller attempts to start (boot) from a CD, if the CD-ROM drive contains a startable (boot-enabled) CD, and no other controller is currently using INT13 extensions. Attention: Only one controller can support INT13 extensions. Adapter and PCI Information displays the ServeRAID controller hardware and PCI register information, as shown in the following example screen. Netfinity 5500 - Type 8660 89