IBM 86601RU Hardware Maintenance Manual - Page 389
IBM Netfinity, Align the shuttle with the guides and slide the shuttle
UPC - 087944414230
View all IBM 86601RU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 389 highlights
Note The default jumper position of J32 and the jumper extension cable is a jumper on pins 1 and 2. Refer to the "Hardware Information" section of the IBM Netfinity 5500 M20 Server Library for a description of the jumper. d. Route the jumper extension cable along the system board and the shuttle side wall. 6. Replace the processor housing guide: a. Remove the screws that secure the processor housing guide and remove the guide. b. Install the processor housing guide 1 that comes with this option and secure with screws 2. 7. Replace the fan assembly and press on the fasteners to lock in place. 8. Replace the processor housing top cover and press on the fasteners to lock in place. 9. Align the shuttle with the guides and slide the shuttle partially into the server. 10. Reconnect the cables to the shuttle that you disconnected in step 14 on page 368. 11. Reconnect the power cables that you disconnected in step 3 on page 370. 12. Grasp the handles on the processor housing top cover and lift the housing. 13. Orient the processor housing with the cable connectors toward the front of the server. 4-way Xeon upgrade installation 381