IBM 86601RU Hardware Maintenance Manual - Page 86

page iv for information about pages IBM maintains on the World Wide Web. Once you have made the ServeRAID diskettes, do the following to start the ServeRAID Configuration program. Insert the ServeRAID Configuration Diskette into the primary diskette drive; then, turn on the system. If the system is already turned on, press Ctrl+Alt+Del. Each time the system starts, the ServeRAID controller performs a power-on self-test (POST). The POST checks the configuration information for the ServeRAID controller and for the configured hard disk drives. When POST detects a problem, an error message appears on the screen. If this occurs, see "Symptom-to-FRU index" on page 264. When the ServeRAID Configuration program starts, go to "Using the ServeRAID Configuration program" on page 101 for more information. 78 Netfinity Server HMM