IBM 867282X Maintenance Manual - Page 67
terminal on the terminal block., Torque the wiring-terminal screws to 12 inch-pounds 1.4
UPC - 087944650966
View all IBM 867282X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Note: The wires must be connected in the order described to ensure proper safety and operation of the - 48 V power supply. Protective ground terminal Return terminal 0 V (+) Terminal block cover -48 V terminals (--) b. Connect the return or 0 V wire to the return (+) terminal on the terminal block. c. Connect the - 48 V (-) wire to the (-) terminal on the terminal block. Note: Torque the wiring-terminal screws to 12 inch-pounds (1.4 newton-meters). 3. Close the terminal block cover. Chapter 6. FRU information (service only) 59
Note:
The wires must be connected in the order described to ensure proper
safety and operation of the
–
48 V power supply.
Protective
ground terminal
Return terminal
0 V
(
)
+
Terminal block
cover
-48 V terminals (
)
--
b.
Connect the return or 0 V wire to the return (+) terminal on the terminal
block.
c.
Connect the
–
48 V (
–
) wire to the (
–
) terminal on the terminal block.
Note:
Torque the wiring-terminal screws to 12 inch-pounds (1.4
newton-meters).
3.
Close the terminal block cover.
Chapter 6. FRU information (service only)
59