IBM 867282X Maintenance Manual - Page 71
Symptom-to-FRU index, Beep symptoms, Diagnostic error codes
![]() |
UPC - 087944650966
View all IBM 867282X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Chapter 7. Symptom-to-FRU index This index supports xSeries 300 server. The Symptom-to-FRU lists symptoms, errors, and the possible causes. The most likely cause is listed first. Use this Symptom-to-FRU index to help you decide which FRUs to have available when servicing the computer. The POST BIOS displays POST error codes and messages on the screen. Beep symptoms Currently there are two kinds of beep codes in BIOS. This code indicates that a video error has occurred and the BIOS cannot initialize the video screen to display any additional information. This beep code consists of a single long beep followed by two short beeps. The other code indicates that your DRAM error has occurred. This beep code consists of a single long repeating beep. No beep symptoms No Beep Symptom No beep and the system operates correctly. No Beeps occur after successfully completing POST No ac power No beep and no video FRU/Action 1. Check speaker cables 2. Speaker 3. System board 1. Check speaker connections 2. Speaker 3. System board 1. Check the power cord. 2. Power supply. 1. See "Undetermined problems" on page 70 Diagnostic error codes Note: In the following error codes, if XXX is 000, 195, or 197,do not replace a FRU. The description for these error codes are: 000 The test passed. 195 The Esc key was pressed to abort the test. 197 This is a warning error and may not indicate a hardware failure. Error Code/Symptom 001-XXX-000 (Failed core tests) For all error codes, replace/follow the FRU/Action indicated. FRU/Action 1. System Board © Copyright IBM Corp. 2000 63
![](/manual_guide/products/ibm-867282x-maintenance-manual-2e70642/71.png)