IBM 8685 Hardware Maintenance Manual - Page 165
Fan error messages, System shutdown, temperature fault
UPC - 087944957171
View all IBM 8685 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 165 highlights
Fan error messages Note: See "System" on page 162 to determine which components should be replaced by a field service technician. Message Action Fan x failure (level-critical; fan x had a failure) 1. Check connections to fan x. 2. Replace fan x. Fan x fault (level-critical; fan x beyond recommended RPM range) 1. Check connections to fan x. 2. Replace fan x. Fan x outside recommended speed action 1. Replace fan x. Power error messages Note: See "System" on page 162 to determine which components should be replaced by a field service technician. Message Action Power supply x current share fault (level-critical; excessive current demand on power supply x) v Replace power supply x. Power supply x DC good fault v Replace power supply x. (level-critical; power good signal not detected for power supply x) Power supply x temperature fault v Replace power supply x. Power supply x removed v No action required - information only. Power supply x fan fault (level-critical; fan v Replace power supply x. fault in power supply x) Power supply x 12 V fault (level-critical; overcurrent condition detected) v See "Power checkout" on page 37. Power supply x 3.3 V fault (level-critical; 3.3 V power supply x had an error) v See "Power checkout" on page 37. Power supply x 5 V fault (level-critical; 5 V v See "Power checkout" on page 37. power supply x had an error) System running non-redundant power (level-noncritical; system does not have redundant power) 1. Add another power supply. 2. Remove options from system. 3. System can continue to operate without redundancy protection if steps 1 and 2 are not followed. System under recommended voltage for x 1. Check connections to the power subsystem. (level-warning; indicated voltage supply under nominal value; value for x can be +12, 2. Power supply. -12, or +5) 3. Power backplane. System shutdown Refer to the following tables when experiencing system shutdown related to voltage or temperature problems. Chapter 6. Symptom-to-FRU index 155