IBM 8685 Hardware Maintenance Manual - Page 62
Removing the bezel (tower model), any internal drives in a tower model server
![]() |
UPC - 087944957171
View all IBM 8685 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
1. Review the information in "Before you begin" on page 41, "Handling static-sensitive devices" on page 42, and "Safety information" on page 169. 2. Press on the two release latches at the top edge of the bezel, and pull the top of the bezel slightly away from the server. 3. Lift the bezel to release the two tabs at the bottom edge of the bezel. 4. Store the bezel in a safe place. Removing the bezel (tower model) Before you can access the controls on the front of a tower model server or install any internal drives in a tower model server, you must first remove the bezel. Complete the following steps to remove the tower model bezel. Lock 1. Unlock the bezel, if it has not already been unlocked. 2. Press on the two release latches at the top edge of the bezel, and pull the top of the bezel slightly away from the server. 52 xSeries 255 Type 8685: Hardware Maintenance Manual and Troubleshooting Guide
![](/manual_guide/products/ibm-8685-hardware-maintenance-manual-c0ebf0c/62.png)