IBM 8685 Hardware Maintenance Manual - Page 92

24. If your server is a tower model, continue with the next step. If your server is a rack model and you have already installed the server in a rack enclosure, you must reconnect the cable-management-arm bracket to the server. a. Slide the server into the rack. b. Reattach the cable-management-arm bracket to the server. Cable-management arm bracket Cable-management arm Captive screw Tab Fan bay 7 (fan removed) 1) Remove the fan from fan bay 7. 2) Insert the tab on the cable-management-arm bracket into the corresponding slot on the server. 3) Tighten the captive screw on the cable-management-arm bracket to the server. 4) Reinstall the fan in fan bay 7. 25. If you have other options to install or remove, do so now; otherwise, go to "Completing the installation" on page 106. Installing memory modules Adding memory to your server is an easy way to make programs run faster. You can increase the amount of memory in your server by installing memory-module options. When you install memory, you must install a set of two or four matched dual inline memory modules (DIMMs). Before you install memory, review the following: 82 xSeries 255 Type 8685: Hardware Maintenance Manual and Troubleshooting Guide