IBM 8840 Hardware Maintenance Manual - Page 88
Error, code/symptom, FRU/action, Configuration/Setup, Utility, program., System, board, serial,
UPC - 000435863799
View all IBM 8840 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
Note: See "System" on page 108 to determine which components a field service technician should replace. Error code/symptom FRU/action 161 (Real time clock battery error) 1. Run the Configuration/Setup Utility program. 2. Battery. 3. System board. 162 (Device configuration error) Note: Be sure to load the default settings and any additional desired settings; then, save the configuration. 1. Run the Configuration/Setup Utility program. 2. Battery. 3. Failing device. 4. System board. 163 (Real-time clock error) 1. Run the Configuration/Setup Utility program. 2. Battery. 3. System board. 164 (Memory configuration changed.) 1. Run the Configuration/Setup Utility program. 2. DIMM. 3. System board. 175 (Hardware error) System board 176 (Computer cover or cable cover was removed without a key being used) 1. Run the Configuration/Setup Utility program. 2. System board. 177, 178 (Security hardware error) 1. Run the Configuration/Setup Utility program. 2. System board. 184 (Power-on password damaged) 1. Run the Configuration/Setup Utility program. 2. System board. 185 (Drive startup sequence information corrupted) 1. Run the Configuration/Setup Utility program. 2. System board. 186 (Security hardware control logic failed) 1. Run the Configuration/Setup Utility program. 2. System board. 187 (VPD serial number not set.) 1. Set serial number in the Configuration/Setup Utility program. 2. System board. 188 (Bad EEPROM CRC #2) 1. Run the Configuration/Setup Utility program. 2. System board. 189 (An attempt was made to access the server with invalid passwords) Run the Configuration/Setup Utility program, and type the administrator password. 201 1. (Memory test error.) If the server does not have the latest level of BIOS installed, 2. update the BIOS to the latest level and run the diagnostic program again. DIMM System board 229 (Cache error) 1. Microprocessor 2. Optional microprocessor (if installed) 78 xSeries 346 Types 8840 and 1880: Hardware Maintenance Manual and Troubleshooting Guide