IBM DTLA-305040 Hard Drive Specifications - Page 112
location will be reported with CHS mode or LBA mode; the mode is decided by mode select bit bit 6
View all IBM DTLA-305040 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
The Write Multiple command transfers one block of data for each interrupt. The other commands transfer one sector of data for each interrupt. If the device detects an invalid parameter, it will abort the command by setting BSY=0, ERR=1, ABT=1, and interrupting the host. If an uncorrectable error occurs, the device will set BSY=0 and ERR=1, store the error status in the Error Register, and interrupt the host. The registers will contain the location of the sector in error. The errored location will be reported with CHS mode or LBA mode; the mode is decided by mode select bit (bit 6) of Device/Head register on issuing the command. All data transfers to the device through the Data Register are 16 bits, except for the ECC bytes which are 8 bits. Deskstar 40GV & 75GXP hard disk drive specifications 100