IBM DTLA-305040 Hard Drive Specifications - Page 168
Automatic Acoustic Management
View all IBM DTLA-305040 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 168 highlights
12.28.3.1 Low Power Idle mode Additional electronics are powered off and the heads are unloaded on the ramp. However the spindle is still rotated at the full speed. 12.28.3.2 Low RPM standby mode The heads are unloaded on the ramp and the spindle is rotated at the 60-65% of the full speed. When Feature register is 85h (=Disable Advanced Power Management), the deepest Power Saving becomes normal Idle. 12.28.4 Automatic Acoustic Management When Feature register is 42h (=Enable Automatic Acoustic Management), the Sector Count Register specifies the Automatic Acoustic Management level. FF C0 - FEh 80 - BFh 00 - 7Fh --- Aborted --- Set to Normal Seek mode --- Set to Quiet Seek mode --- Aborted The device preserves enabling or disabling of Automatic Acoustic Management and the current Automatic Acoustic Management level setting across all forms of reset, that is, Power on, Hardware, and Software Resets. Deskstar 40GV & 75GXP hard disk drive specifications 156