IBM DTLA-305040 Hard Drive Specifications - Page 79
General, Device, Check Power Mode, Hard Reset
![]() |
View all IBM DTLA-305040 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
8.0 General This specification describes the host interface of the DTLA-30XXXX. The interface conforms to the Working Document of Information Technology - AT Attachment with Packet Interface Extension (ATA/ATAPI-5), Revision 2, dated 13 December 1999, with certain limitations described in 8.2, "Deviations from standard." 8.1 Terminology Device Host The DTLA-30XXXX hard disk drive The system to which the device is attached 8.2 Deviations from standard The device conforms to the referenced specifications with the following deviations: Check Power Mode. Check Power Mode command returns FFh to Sector Count Register when the device is in Idle mode. This command does not support 80h as the return value. Hard Reset. Hard reset response is not the same as that of power on reset. Refer to section 10.1, "Reset Response," on page 0 for details. Deskstar 40GV & 75GXP hard disk drive specifications 67
![](/manual_guide/products/ibm-dtla307075-hard-drive-specifications-d371d8a/79.png)