IBM DTLA-305040 Hard Drive Specifications - Page 184
S.M.A.R.T. capability, Self-test failure check point
![]() |
View all IBM DTLA-305040 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 184 highlights
12.32.12.5 Total time in seconds to complete off-line data collection activity This field tells the host how many seconds the device requires to complete the off-line data collection activity. 12.32.12.6 Off-line data collection capability Bit Definition 0 Execute Off-line Immediate implemented bit 0 SMART Execute Off-line Immediate subcommand is not implemented 1 SMART Execute Off-line Immediate subcommand is implemented 1 Enable/disable Automatic Off-line implemented bit 0 SMART Enable/disable Automatic Off-line subcommand is not implemented 1 SMART Enable/disable Automatic Off-line subcommand is implemented 2 Abort/restart off-line by host bit 0 The device suspends off-line data collection activity after an interrupting com- mand and resume it after some vendor specific event 1 The device aborts off-line data collection activity upon receipt of a new com- mand 3 Off-line Read Scanning implemented bit 0 The device does not support Off-line Read Scanning 1 The device supports Off-line Read Scanning 4 Self-test implemented bit 0 Self-test routine is not implemented 1 Self-test routine is implemented 5-7 Reserved (0) 12.32.12.7 S.M.A.R.T. capability This word of bit flags describes the S.M.A.R.T. capabilities of the device. The device will return 03h indicating that the device will save its Attribute Values prior to going into a power saving mode and supports the SMART ENABLE/DISABLE ATTRIBUTE AUTOSAVE command. Bit Definition 0 Pre-power mode attribute saving capability If bit = 1, the device will save its Attribute Values prior to going into a power saving model (Standby or Sleep mode). 1 Attribute Autosave capability If bit = 1, the device supports the SMART ENABLE/DISABLE ATTRIBUTE AUTOSAVE command. 2-15 Reserved (0) 12.32.12.8 Error logging capability Bit 7-1 0 Definition Reserved (0) Error Logging support bit If bit = 1, the device supports the Error Logging 12.32.12.9 Self-test failure check point This byte indicates the section of the self-test where the device detected a failure. Deskstar 40GV & 75GXP hard disk drive specifications 172
![](/manual_guide/products/ibm-dtla307075-hard-drive-specifications-d371d8a/184.png)