IBM SAN16B-2 User Guide - Page 45
color, Status, Hardware, Recommended, action, Power, System
![]() |
UPC - 000435819895
View all IBM SAN16B-2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Table 6. System LED patterns during normal operation LED name LED color Status of Hardware Recommended action Power Status No light Switch is off or power supply has failed. Verify that the system is on and has completed booting. If the system is on, the unit is faulty. Contact IBM Support. Steady green Switch is on and power supply is functioning properly No action required. System Status No light Switch is off , boot is not complete, Verify that the system is on and has or boot failed. completed booting. Steady green Switch is operational No action required. Slow-flashing green (on 1 second, off 1 second) One or both of the following are true: Complete the following steps: v One or more environmental ranges are exceeded. v Error log contains one or more port diagnostic error messages. 1. Check environmental conditions, error log, Port Status LEDs, SFPs, cables, and loopback plugs. 2. Correct error condition 3. Clear error log. 4. Rerun diagnostics to verify fix. 5. Contact IBM Support if unable to resolve. Amber Switch is faulty, or is initializing. Wait a few moments to verify that the switch is not initializing. Contact IBM Support, if required. Chapter 3. Operating the SAN16B-2 23
![](/manual_guide/products/ibm-san16b2-user-guide-3a2a168/45.png)