IBM SAN16B-2 User Guide - Page 53
Installing, fiber-optic, cables
![]() |
UPC - 000435819895
View all IBM SAN16B-2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
scale: 1/2" = 1" IOIOI 1 ! 2 b1600010 Figure 16. Locking wire bale SFP in place 1 2 Switch chassis Wire bale (in closed, locked position) 6. Repeat this procedure for the remaining SFPs and ports, as required. For the top row of ports, SFPs will be oriented as shown in Figure 14 on page 30 and Figure 15 on page 30. To install SFPs in the bottom row of ports, orient the SFPs with the plastic tab or wire bale on the top. Installing fiber-optic cables To connect fiber-optic cables to SFP modules, follow the steps below. Note: Fiber-optic cable connectors are keyed to ensure that they are inserted in the SFPs correctly. If a cable does not install easily, ensure that it is oriented and aligned correctly, and that the SFP or cable end is not blocked by a protective cap or other object. 1. Remove the protective caps from the end of the fiber-optic cable. See Figure 17. Remove the protective cap (if any) from the SFP. Save the caps for future use. Fiber-optic cable Protective cap foc00001 Figure 17. Removing the caps from fiber-optic cables Chapter 4. Monitoring and maintaining the SANB16-2 31
![](/manual_guide/products/ibm-san16b2-user-guide-3a2a168/53.png)