IBM SAN16B-2 User Guide - Page 60
Power, supply, specifications
![]() |
UPC - 000435819895
View all IBM SAN16B-2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
The port requires a straight (extension) serial cable with a female 9-pin subminiature-D connector. Only pins 2, 3, and 5 are supported. Power supply specifications The power supply is universal and capable of functioning worldwide without using voltage jumpers or switches. It meets IEC 61000-4-5 surge voltage requirements and is autoranging in terms of accommodating input voltages and line frequencies. The power supply has its own built-in fan for cooling, pushing the air toward the port side of the switch. The power supply is not removable. Table 11 lists the power supply specifications of the switch. Table 11. SAN16B-2 power supply specifications Specification Values Outlet The outlet must be correctly wired and earth-grounded Maximum output from power supply 210 watts, with fans operating Maximum system power consumption 50-65 watts (depending on SFP vendor) Input voltage 100-240 Vac (nominal 80% efficiency), autoranging Input line frequency 47-63 Hz Harmonic distortion Active power factor correction per IEC1000-3-2 BTU rating at 80% efficiency 266 BTU Inrush current 25A, each line input Input line protection Fused in both hot and neutral lines 38 SAN16B-2 Installation, Service, and User's Guide
![](/manual_guide/products/ibm-san16b2-user-guide-3a2a168/60.png)