IBM SAN16B-2 User Guide - Page 48
Interpreting, results
UPC - 000435819895
View all IBM SAN16B-2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Interpreting POST results POST is a system check that is performed each time the switch is powered on, rebooted, or reset. During POST, the LEDs flash amber and green. Any errors that occur during POST are listed in the error log. To determine whether POST completed successfully and whether or not any errors were detected: 1. Verify that the switch LEDs indicate that all components are healthy. See the tables in "LED patterns and recommended actions" on page 22 for descriptions and interpretation of LED patterns. If one or more LEDs do not display a healthy state, verify that the LEDs on the switch are not set to beacon; use the switchShow command. 2. Verify that the switch prompt displays on the terminal of a computer workstation connected to the switch. If there is no switch prompt when POST completes, press Enter. If the switch prompt still does not display, open another Telnet session or access the switch through another management tool. If this is not successful, the switch did not successfully complete POST. Contact IBM Service for repair. 3. Review the switch system log for errors. Any errors detected during POST are written to the system log, which is accessible through the errShow command. For information about all referenced commands, and on accessing the error log, refer to Brocade Fabric Administrator's Guide. For information about error messages, refer to the Brocade Fabric OS System Error Message Reference Manual. 26 SAN16B-2 Installation, Service, and User's Guide