Icom IC-7000 Instruction Manual - Page 14
Multi-function keys - agc
View all Icom IC-7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
1 PANEL DESCRIPTION ■ Multi-function keys D Menu M-1 functions SPL A/B FIL F-1 F-2 F-3 XFC F-4 SPLIT OPERATION SPL ➥ Push momentarily to toggle the split function ON or OFF. (p. 89) F-1 and transmit frequency appear when the split function is ON. ➥ Hold down for 1 second to turn the quick split function ON. (p. 90) •The offset frequency must be programmed in advance using the miscellaneous (others) Set mode. (pp. 129, 130) •The offset frequency is the shift from the displayed frequency. • The quick split function can be turned OFF in the miscellaneous (others) Set mode. (p. 129) VFO A/B SELECTION A/B ➥ Push momentarily to exchange the transmit VFO and receive VFO contents. (p. F-2 27) ➥ Push momentarily to toggle the transmis- sion VFO and reception VFO during split operation. (p. 89) ➥ Push momentarily to toggle the transmit and receive frequencies (and modes) of memory channels when the split function is turned ON. ➥ Hold down for 1 second to equalize the frequency and operating mode of the two VFO's. • The lower indicated frequency and operating mode are equalized to the upper (indicated) VFO frequency and operating mode. FILTER SELECTION (p. 75) FIL ➥ Push momentarily to select one of three IF filter settings. F-3 ➥ Hold down for 1 second to enter the filter Set mode. TRANSMIT FREQUENCY CHECK (pp. 65, 89) XFC Monitors the transmit frequency when held down. F-4 • While holding down this key, the transmit frequency can be changed with [DIAL]. D Menu M-2 functions MEM MW MCL F-1 F-2 F-3 V/M F-4 MEMORY MENU (p. 103) MEM Push momentarily to indicate the memory frequency and modes. F-1 • Memory list indication is available. MEMORY WRITE (pp. 101, 102) MW Hold down for 1 second to store the selected frequency and operating mode into F-2 the displayed memory channel. MEMORY CLEAR (p. 106) MCL Hold down for 1 second to clear the selected memory channel contents. F-3 • " " appears. VFO/MEMORY SELECTION V/M ➥ Push momentarily to toggle VFO and memory modes. (pp. 27, 100) F-4 ➥ Hold down for 1 second to transfer the selected memory channel to the currently displayed VFO. (p. 107) D Menu M-3 functions DURING SSB OPERATION: VOX COM AGC F-1 F-2 F-3 TBW F-4 DURING CW OPERATION: BRK 1/4 AGC F-1 F-2 F-3 F-4 DURING RTTY OPERATION: 1/4 AGC F-1 F-2 F-3 F-4 DURING AM OPERATION: VOX AGC F-1 F-2 F-3 F-4 5