Icom IC-7000 Instruction Manual - Page 149
Option Units Setting - cooling fan modification
View all Icom IC-7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 149 highlights
16 OPTION UNITS SETTING ■ MB-106 carrying handle The optional MB-106 carrying handle is convenient when carrying the transceiver for DX' peditions, field operation, etc. q Attach the rubber feet with the supplied screws as shown below. Rubber feet w Attach the MB-106 to the left side of the transceiver as shown below. Carrying handle ■ Band voltage modification If you want to connect an external unit which can be controlled by the band voltage from [ACC] connector, the following modification is necessary. The band voltage appears on pin 5 of [ACC] connector after modification is completed. Performing this modification is the customer's re- sponsibility. Icom does not guarantee this modifi- cation's result. CAUTION: Disconnect the DC power cable from the transceiver before any work on the transceiver. • Band voltage generator circuit The below circuit is just for reference. ACC socket of an optional unit GND 7 6 3 1 5 24 8 V 4700 pF BAND Diode 100 µH 4700 pF 4.7 kΩ 4700 pF Extenal power souce 8 V 100 µH 1.9 MHz VR 4.7 kΩ 3.5 MHz Rotary switch VR 4.7 kΩ 7 MHz Open 10 MHz VR 10 kΩ 14 MHz VR 10 kΩ 18/21 MHz OR 22 kΩ 24/28 MHz IC-7000's top view with DDS unit top panel is opened Cooling fan Front panel Bridge these solder pads The following band voltage table is for reference only. Please adjust and confirm against the actual operating condition. BAND VOLTAGE 1.9 MHz 3.5 MHz 7 MHz 10 MHz 14 MHz 18/21 MHz 24/28 MHz - 6.1 V 5.1 V - 4.1 V 3.1 V 2.1 V 15 16 140