Icom IC-7000 Instruction Manual - Page 67

4 RECEIVE AND TRANSMIT Convenient functions for receive (continued) • DSP noise reduction (p. 79) • Auto notch filter (p. 80) ➥ Push [NR/LEV] to turn the DSP noise reduction ➥ Push [ANF/• REC] to turn the auto notch filter ON or OFF. ON or OFF. • " " appears when the DSP noise reduction is set • " " appears when the auto notch filter is set to ON. to ON. ➥ Hold down [NR/LEV] for 1 second to enter the noise reduction level Set mode, then rotate [DIAL] to adjust the DSP noise reduction level. • VSC (voice squelch control) (p. 82) ➥ While "S-1" is selected, push [F-4 VSC] to turn the VSC function ON or OFF. • " " appears when VSC function is set to ON. • Manual notch filter (pp. 80, 81) ➥ Push [MNF/ADJ] to turn the manual notch filter ON or OFF. • " " appears when the manual notch filter is set to ON. ➥ Hold down [MNF/ADJ] for 1 second to enter the manual notch filter Set mode. • Push [F-2 NF1], [F-3 NF2] to select the notch filter, push [F-4 NW] to set the filter width, rotate [DIAL] to set the notch frequency. 4 D Convenient functions for transmit • Transmit quality monitor (p. 87) ➥ Push [AF(set)], then [F-4 OTH] to enter the miscellaneous (others) Set mode. Select an item with [F-1 ≤]/[F-2 ≥], then rotate [DIAL] to turn the monitor function ON or OFF. • VOX (voice operated transmit) (p. 83) ➥ While "M-3" is selected, push [F-1 VOX] to turn the VOX function ON or OFF. • Hold down [MENU/GRP] for 1 second once or twice to select the menu group M. • Push [MENU/GRP] momentarily one or more times to select the menu M-3. • " " appears when the VOX function is set to ON. ➥ While "M-3" is selected, hold down [F-1 VOX] for 1 second to enter the VOX Set mode. • Push [F-1 ≤]/[F-2 ≥] to select an item. • Rotate [DIAL] to set the value/conditions. 58