Icom IC-7000 Instruction Manual - Page 19
Microphone connector
View all Icom IC-7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
D Microphone connector MICROPHONE CONNECTOR INFORMATION 1 PANEL DESCRIPTION Rear panel view 87654321 CAUTION: DO NOT short pin 1 to ground as this can damage the internal 8 V regulator. 1 HM-151 q +8 V DC output w Frequency up/down e M8V SW r PTT t GND (Microphone ground) y Microphone input u GND i DATA IN • When HM-151 is connected PIN NO. FUNCTION 1 +8 V DC output Frequency up 2 Frequency down 3 HM-151 connection 8 HM-151 data DESCRIPTION Max. 10 mA Ground Ground through 470 Ω Grounded to indicate HM-151 is connected. Control signal input HM-103 q +8 V DC output w Frequency up/down e M8V SW r PTT t GND (Microphone ground) y Microphone input u GND i Squelch switch • When HM-103 is connected PIN NO. FUNCTION 1 +8 V DC output Frequency up 2 Frequency down 3 HM-151 connection Squelch open 8 Squelch closed DESCRIPTION Max. 10 mA Ground Ground through 470 Ω Open "LOW" level "HIGH" level CAUTION: NEVER connect or use the supplied HM-151 (microphone) with any other transceiver. This could cause damage to the transceiver. The HM-151 is designed for use with the IC-7000 ONLY. 10