Icom IC-7000 Instruction Manual - Page 94
Break-in function
View all Icom IC-7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
6 FUNCTIONS FOR TRANSMIT ■ Break-in function The break-in function is used in CW mode to automatically switch the transceiver between transmit and receive when keying. The IC-7000 is capable of full break-in or semi break-in. D Semi break-in operation During semi break-in operation, the transceiver selects transmit when keying, then automatically returns to receive after a pre-set time from when you stop keying. • Semi break-in operation q Push [MODE] to select CW or CW-R mode. w Select M-3. • Hold down [MENU/GRP] for 1 second once or twice to select the menu group M. • Push [MENU/GRP] momentarily one or more times to select the menu M-3. e Push [F-1 BRK] once or twice to turn the semi break-in function ON. • " " appears. • Break-in delay setting q Push [MODE] to select CW or CW-R mode. w Select M-3. e Hold down [F-1 BRK] for 1 second to enter the break-in delay time Set mode. r Rotate [DIAL] to set the break-in delay time (the delay from transmit to receive). [MENU/GRP] [F-1] [DIAL] Appears [MENU/GRP] [F-1] When using a paddle, set "Key Speed" in the quick Set mode to adjust the keying speed. (p. 122) D Full break-in operation During full break-in operation, the transceiver automatically switches to receive between keying dots and dashes so that the operator can hear activity on the channel when transmitting. Appears [MENU/GRP] [F-1] q Push [MODE] to select CW or CW-R mode. w Select M-3. • Hold down [MENU/GRP] for 1 second once or twice to select the menu group M. • Push [MENU/GRP] momentarily one or more times to select the menu M-3. e Push [F-1 BRK] once or twice to turn the full break-in function ON. • " " appears. W hen using a paddle, set "Key Speed" in the quick Set mode to adjust the keying speed. (p. 122) 85