Icom IC-7000 Instruction Manual - Page 77
Programming a DTMF code, DTMF speed
View all Icom IC-7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
4 RECEIVE AND TRANSMIT D Programming a DTMF code q Push [MODE] to select FM mode. w Select S-1. • Hold down [MENU/GRP] for 1 second once or twice to select the menu group S. • Push [MENU/GRP] momentarily one or more times to select the menu S-1. e Push [F-2 DTM] then [Z(menu/grp)] to select the DTMF root menu. [F-1] [MENU/GRP] [F-2] [F-3] [F-4] [DIAL] • If the DTMF root menu appears, skip pushing [Z(menu/grp)]. The DTMF starting menu can be changed in the miscellaneous (others) Set mode. (see p. 134) r Push [F-2 EDT] to enter the DTMF edit menu. t Push [F-1 D1] - [F-4 D4] to select the desired DTMF memory channel. y Select the desired code by rotating [DIAL]. • Push [F-1 Å] or [F-2 Ç] for cursor movement. • Push [F-3 DEL] to delete the selected code. u Repeat steps t and y until the desired contents DTMF memory channel select 4 are input. i Push [Z(menu/grp)] to return to memory channel selection mode, then select the next memory channel and repeat steps t and u for code input, if desired. o Push [Z(menu/grp)] twice to exit the keyer edit mode. Selected code D DTMF speed The rate at which DTMF memories send individual DTMF characters can be set to accommodate operating needs. q Select the DTMF root menu as described above. w Push [F-4 SET] to enter the DTMF Set mode. e Rotate [DIAL] to set the desired DTMF speed. • Four rates are available: "100 ms" is the fastest; "500 ms" is slowest. • Hold down [F-4 DEF] for 1 second to select the default rate. r Push [Z(menu/grp)] twice to exit the DTMF Set mode and return to the normal FM mode display. 68